Inserting And Replacing Dust Bag; Assembling Accessories; Beginning/End Of Cleaning; Replacing Main Filter - Vermop Jet vac Mode D'emploi

Inserting and replacing dust bag

Caution: Switch off the appliance and pull out the plug if you wish to replace the dust bag!
[08] Open the flap as shown.
[09] Remove the suction hose (2) by lightly turning towards the left and pulling out
the bayonet connection.
[11] Remove the dust bag (7) and dispose of it correctly. Insert a new dust bag (7). Please note that the
dust bag must be inserted into the guides on the inside of the casing.
[06] Attach the suction hose (2) to the appliance (1). The suction hose (2) is firmly attached to the
appliance (1) by simple insertion and a light turn to the right.

Assembling accessories

[06] Attach the suction hose (2) to the appliance (1). The suction hose (2) is locked in position to the
appliance (1) by simple insertion and a light turn to the right.
[07] Insert the telescopic tube (3) into the suction hose (2). Attach the suction nozzle (4) or other suction
attachment supplied by the manufacturer (5, 6) onto the telescopic tube.
Adjust the telescopic tube to your height.
In order to reduce suction briefly (e.g. to allow the appliance to glide more easily over long-piled
carpets), open the false air intake on the handle of the suction hose (2).
Warning: Working without a dust bag and motor filter can lead to damage to

Beginning/end of cleaning

[05] The appliance (1) can be switched ON or OFF by touching the grey foot bar.

Replacing main filter

Caution: Switch off the appliance and pull out the plug if you wish to replace
[08] Open the flap as shown.
[10] Now take out the motor filter (anthracite) (9) and dispose of it correctly.
Insert the new motor filter (anthracite) (9) and close the flap.
14
the appliance and is not permitted!
the motor filter!