Overview And Use - Perel Tools EFLC2 Notice D'emploi

•
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
4. Features
•
Settings: 3 white LEDs / 6 white LEDs / 1 yellow LED / off
•
bungee strap

5. Overview and use

Refer to the illustrations on page
1 lantern
2 bungee strap
3 housing
6. Use
Refer to the illustrations on page
•
Make sure batteries are inserted. Refer to §7.
•
Press the mode button [6] to scroll through the different functional
modes:
•
First press: torch
•
Second press: bright white lantern
•
Third press: moderate yellow lantern
•
Fourth press: off
•
The bungee strap [2] can be used in two ways:
[A]: to hang the lantern on a tent pole etc. ...
o
[B]: to carry as a torch.
o
7. Batteries
•
Replace the batteries when the light becomes dim.
•
Switch off the device [6] and unscrew the torch head [5] (counter
clockwise).
•
Gently pull the battery holder [4] from the housing [3].
•
Insert 3 new 1.5V AA batteries following the polarity as indicated inside
the battery compartment. Only use new batteries of the same type with
the same specifications.
•
Slide the battery holder [4] back into the housing [3]. It fits in only
one way; do not force.
•
Screw the torch head [5] back in place (clockwise).
•
02 – 28/12/2012
EFLC2
of this manual.
2
4 battery holder
5 torch head
6 mode button
of this manual.
2
4 ©Velleman nv