Eton WEATHER TRACKER FR800 Manuel De L'utilisateur page 5

SETTING ALERT MODE (SIREN or VOICE)
Turn off the radio and press the MENU button. SETUP TIME appears in the
display. Press the button twice. ALERT appears in the upper part of the
display, with SIREN or VOICE to its right. Press the
or VOICE flashes. Press the
to hear when an ALERT is activated. Press MENU twice to exit and save
the setting.
While the alert SIREN is activated, you can press the ON/OFF ALERT
button at the top of the radio to turn it on or off.
SETTING S.A.M.E
.
Codes in the US, CLC Codes in Canada
• S.A.M.E. = Specific Area Message Encoding
• CLC = Canadian Location Codes
8
A six-digit code instructs the radio only to receive an ALERT when the
code is programmed in. There are far too many S.A.M.E and CLC codes
to include them all in this manual. We therefore provide the following
to assist you in looking up the code for your area.
Look up a United States county code at the following web site:
http://www.nws.noaa.gov/nwr/indexnw.htm#sametable
Look up a Canadian CLC code at:
http://www.msc-smc.ec.gc.ca/msb/weatheradio/transmitter/index_e.cfm
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set
to receive ALL coded information sent from any transmitter, if you're
within range. When you set codes, it will only pick up alerts when you're
in that county or within reception distance of the signal. ALL, MULTI
or SINGLE COUNTY will appear in the lower left side of the display,
depending on how you have set it.
button and SIREN
buttons to select the one that you wish
If you want to receive all alerts:
SINGL E ALE RT SINGL E ALERT
COUN TY SIREN COUN TY
1 2
Turn POWER off
Press MENU
SINGL E ALERT SINGL E ALERT
COUN TY SIRE N COUN TY
4 5
Press and the Press
COUNTY - ALL
display will flash
To set single or multiple codes:
Select SINGLE below if you only want to enter a code for a single area.
Enter MULTI if you wish to enter multiple codes for different areas.
Remember, you must be in that area to receive the ALERT for the area.
1. Turn the radio off.
Alert / WB ( Weather alert button)
2. Press the MENU button to enter the setting menu.
3. Press the buttons to select COUNTY at the top of the display
Alarm ON / OFF
with SINGLE, MULTI or ALL to the right of it.
4. Press the button to make the wording to the right
Snooze
of COUNTY flash.
5. Press the buttons to select SINGLE or MULTI.
WB (Weather Band)
Continues on next page...
AM / FM Tuner Band
Alert ON / OFF
Power ON / OFF
USER MANUAL WEATHER TRACKERFR800
SINGL E ALERT
SIRE N SIRE N
COUN TY
3
Press and
choose COUNTY
SINGL E ALERT
SIRE N COUN TY SIRE N
6
Press MENU twice to
until
exit and save the setting
9