TEFAL Elegance 92040 Mode D'emploi page 3

Thank you for buying a Tefal kettle. Read the following instructions
carefully, common to all our models, and keep them in a safe place.
1
Open the lid: while pressing on the locking
system (depending on model), pull from
the front towards the rear.
To close, press the lid down firmly.
2
Remove all packaging, stickers or other
accessories from the inside and outside
of the kettle.
3
Adjust the length of the cord
by winding it under the base.
Wedge the cord in the slot.
4
Place the base on a smooth surface
which is clean and cool.
Use
• Only boil water in the
kettle
Place the kettle and its
base towards the back
of the working surface.
• Do not place the
kettle on or near
surfaces which are
slippery or hot and do
not let the cord hang
over a source of heat
(hot plates, gas
cookers). Keep away
from children
• The kettle must only
be used with its
original base.
GB