Bresser 70-20101 Mode D'emploi page 7

should be removed from the unit if it
has not been used for a long time.
Notes on cleaning
Separate the device from the power
supply before cleaning (remove bat-
teries)!
EC Declaration of Conformity
Meade Instruments Europe
GmbH & Co. KG declares that
the device (Moisture Sensor, Art.No.:
70-20101) is in accordance with ap-
plicable guidelines and correspond-
ing standards of the 1999/5/EG di-
rective.
DISPOSAL
Dispose of the packaging ma-
terials properly, according to
their type, such as paper or
cardboard. Contact your local waste-
disposal service or environmental au-
thority for information on the proper
disposal.
Do not dispose of electronic
devices in the household gar-
bage!
2002/96/EC of the European Parlia-
ment on waste electrical and electronic
equipment and its adaptation into Ger-
man law, used electronic devices must
be collected separately and recycled in
an environmentally friendly manner.
Empty, old batteries must be
disposed of at battery collec-
tion points by the consumer. You can
find out more information about the
disposal of devices or batteries pro-
duced after 6 January 2006 from
your local waste-disposal service or
environmental authority.
As per
GB
Directive
7