Hama Pocket 2.0 Mode D'emploi page 10

7.2 Audio playback via an audio cable (3.5 mm jack)
Ensure that the loudspeaker is switched off.
Connection with the audio cable
1
Connect your mobile device (MP3 player, smartphone, etc.) and the AUX input (6) on the
loudspeaker using an audio cable with a 3.5 mm jack plug.
Set the volume on your device to a low level.
2
Switch the loudspeaker on
Switch the loudspeaker on. A signal tone and the green status LED (7) con rm the readiness for
operation.
Start audio playback on the connected device. The music playback can also be controlled from the
speaker (provided the connected device supports this).
AUX
green