Personal Safety - Greencut SRM120C Manuel D'utilisation

All information in this manual is relevant to your own safety and that of your environment. If you have any questions
about the information contained in this manual, consult a professional or contact the Official Technical Service.
The following information on hazards and precautions includes the most likely situations that may arise during use of
this machine. Consult all product documentation, packaging and labels before use.
If you encounter a situation not described in this manual, use common sense to use the machine as safely as possible
and if you see danger, do not use the machine.
USERS
• This product has been designed to be handled by users of legal age who have read and understood these
instructions. Do not allow underage persons or persons who do not understand these instructions to use the
product.
• Before using this product, familiarize yourself with it. Make sure you know where all the controls are, the safety
devices and how they should be used.
• If you are an inexperienced user we recommend that you practice doing simple work and, if possible, in the
company of an experienced person.

PERSONAL SAFETY

• Don't force this machine. Use this machine, accessories, tools, etc. according to these instructions, taking into
account the conditions and the work to be carried out. Using this machine for unintended purposes can cause
a dangerous situation.
• Be alert, watch what you're doing when you drive this machine.
• Avoid unintentional start-up of the unit. Make sure the switches are in the off position before connecting the
machine to an electrical power source.
• Do not use this machine when tired or under the influence of drugs, alcohol, or medications.
• Check that all security features are installed and in good condition. Do not use this machine if any of its
components are damaged. Do not use blunt or bent blades.
• Operate the machine only when it is on a fixed, stable, level surface. Slippery or unstable surfaces may cause a
loss of balance or control of the machine.
• Danger of injury during operation of the machine. Always use caution when handling the workpiece.
• Make sure the blade is properly installed and adjusted before using the machine.
• Do not start the machine with the workpiece touching the blade.
• Do not attempt to cut materials that are not suitable for the cutting speed of the machine and the type of blade.
• Do not cut a workpiece that is too small to hold securely.
• Do not reach under the saw table when the engine is running.
• Be careful when cutting round or irregularly shaped workpieces. Round parts can roll and irregularly shaped
workpieces can pinch the blade.
• Make sure the table is locked in position before starting the machine.
• When cutting large workpieces, make sure that the material is supported at table height.
• If the blade becomes jammed, turn off the machine and disconnect it from the power supply.
• Inhalation of sawdust may present health risks. The use of a mask and a dust extraction system is recommended.
• Keep hair, clothing, jewelry and gloves away from moving parts.
• Do not leave this machine running unattended.
WORK CLOTHES
• Dress appropriately. Do not wear loose clothing or jewelry that could get caught in moving parts.
49
EN