Viscount V3.12A Dlx Mode D'emploi page 18

User Manual
This remote control can be used also with other organs or devices (also
another V3.12A or V3.12A Dlx): The control signal must have a level of
+12 V DC and a current of 300 mA.
11.
[OUT] connector: mini-jack connector; link to the [IN] port of another
V3.12A or V3.12A Dlx to switch on and off a diffusor chain with an organ.
NB:
When using more than one V3.12A or V3.12A Dlx linked in a chain (via
[IN] and [OUT] connectors), each speaker will turn on approximately
one second later than the previous one.
12.
[MAIN] connector: power plug, connect to the power socket.
viscount
EN - 6
V3.12A – V3.12A Dlx