Looking After The Product - Viscount V3.12A Dlx Mode D'emploi

viscount
V3.12A - V3.12A Dlx
TABLE OF CONTENTS
Important notes .......................................................................................... 1

Looking after the product .................................................................................... 1

Connections ........................................................................................................... 1
Notes about the manual ....................................................................................... 2
Description ................................................................................................. 3
Connection and control panel .................................................................... 4
Connection example .................................................................................. 7
Technical specifications............................................................................. 8
IMPORTANT NOTES
LOOKING AFTER THE PRODUCT
•
Do not apply excessive force to the instrument's structures or the controls
(buttons, connectors, etc.).
•
When possible, do not place the instrument close to units which generate
strong interference, such as radios, TVs, computer videos, etc.
•
Do not place the instrument close to heat sources, in damp or dusty places
or in the vicinity of strong magnetic fields.
•
Do not expose the instrument to direct sunlight.
•
Never insert foreign bodies inside the instrument or pour liquids of any
kind into it.
•
To clean the case, use only a soft brush or compressed air.
CONNECTIONS
•
Before making the connections, ensure that all spekares you are using are
off. This will prevent noisy or even dangerous signal peaks.
•
If the instrument is to be out of use for lengthy periods, disconnect the
plug from the power socket.
•
Connect the power cable to an earthed socket.
•
Check that the voltage corresponds to the voltage shown on the serial
number plate of the device.
EN - 1
User Manual