Care & Maintenance; How To Clean; Resetting The Motor Thermostat - Ninja BL620C Série Manuel Du Propriétaire

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1
Separate/remove all parts from each other.
2 Hand Washing: Wash the containers, lids, blade
assemblies in warm, soapy water. When washing the
blade assemblies, use a dish-washing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assemblies with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Stacked Blade Assembly,
and Nutri Ninja Blade Assembly with care when
washing, as the blades are sharp. Contact with
the blades' edges can result in laceration.
3 Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
13 1.877.646.5288
HOW TO STORE
1
Store the Ninja Professional Blender & Nutri Ninja
®
Cups upright with the blade assembly inside the
corresponding container with the lid secured on top.
Do not place anything on top. Store the rest of the
attachments in a safe place where they will not be
damaged and won't cause harm. Loosely wrap the
power cord around the cord storage hook in the back of
the motor base.
NOTE: Do not store blended or unblended ingredients in
the Nutri Ninja cup with the blade assembly attached.

RESETTING THE MOTOR THERMOSTAT

The Ninja Professional Blender & Nutri Ninja Cups
features a unique safety system which prevents
damage to the unit's motor and drive system should you
inadvertently overload your appliance. If the appliance is
being overloaded, the motor will stop and the appliance
will not run. To reset the appliance, follow the resetting
procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assemblies.
3
Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
™