Installation Of The Device - FAR TI60ST333/CH Manuel D'utilisation

WARNINGS
I
nstallation and maintenance of the device must only be carried out by
-
QUALIFIED TECHNICIAN and shall comply with local safety standards.
F
ailure to observe this rule will break the warranty.
-
T
he induction cooking should not be installed on a dishwasher or a tumble dryer.
-
F
or better reliability of the device, the induction cooking must be installed correctly
-
so that the diffusion of heat is optimal.
T
he wall and the heat zones situated above the induction cooking must be resistant to
-
heat.
T
o prevent any damage, the countertop and the glue must be resistant to heat.
-
D
o not use a steam cleaner.
-
Induction cooking installation
M
1. ake a cut in the countertop respecting the measurements
shown in the diagram below.
should be left around a cut.
must be of at least 3 cm and composed of a material
resistant to high temperatures to avoid significant
deformation caused by heat from the induction
cooking, as illustrated in Scheme (1).
I
2. n all cases, make sure the induction cooking is well
ventilated and the airflow locations are not obstructed.
N T
ote: he safety distance between the induction cooking
and any surrounding furniture must be at least 760 mm.

INSTALLATION OF THE DEVICE

A
minimum distance of 5 cm
T
he countertop's thickness
S
cheme (2).
23
+0.4
cm
49
+0.4
cm
+0.1
56
+0.1
Scheme (1)