Télécharger Imprimer la page

SEVERIN HS 7812 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
by one, but take special care that the
terminals are not short-circuited by
mistake.
Nose hair trimmer
Battery
A decrease in operating speed indicates that
the battery needs to be replaced.
During extended periods of non-use, always
remove the battery from its compartment.
Battery replacement:
- Slide the battery compartment cover
downwards and take it off.
- Insert one "AA"-type battery. The use of
rechargeable batteries will result in a
reduced operating speed, as the
operating voltage has a lower rating.
When inserting the battery, always
ensure correct polarity: the battery
terminals must be aligned in accordance
with the diagram shown in the instruction
manual and battery compartment.
- Replace the battery compartment cover
and slide it upwards until it is heard
locking into place.
Use
- Switch the nose hair trimmer on.
- Insert the trimming head carefully into
the nose and cut the access hair.
- Switch the nose hair trimmer off.
Care and Cleaning
It is essential to switch off the last used
appliance and then remove the adapter
from the wall socket before cleaning and
oiling.
To avoid the risk of electric shock, the
appliance and the adapter must not be
immersed in liquid or even allowed to
come into contact with liquid.
- If necessary, the exterior surfaces of the
charging base, hair trimmer and nose hair
trimmer may be wiped with a dry, lint-
free cloth.
Hair trimmer
Trimming comb and trimming blade
- After each use, use the cleaning brush to
remove the hair between the trimming
comb and the trimming blade.
- The trimming comb and trimming blade
can be removed for occasional thorough
cleaning, or for replacement. To remove,
push the comb and blade assembly gently
away from the appliance.
Before use, and also each time after the
appliance has been used for approx. 15
minutes, put a few drops of acid-free oil
between the trimming comb and the
trimming blade and then switch the
appliance briefly on to ensure that the oil
is well and evenly distributed. Regular
oiling will guarantee good cutting
performance over a long period and thus
a long service life.
- When the appliance is not in use, put the
protective cover over the trimming comb.
Nose hair trimmer
- The trimming head can be cleaned with a
suitable cleaning brush. If necessary (e.g.
for thorough cleaning), the trimming
head attachment may be removed by
turning it anti-clockwise and lifting it off.
Carefully remove the trimming insert
and clean it with the cleaning brush.
Caution – danger of injury: the blades
are extremely sharp.
After cleaning, replace the trimming
insert to the trimming head attachment,
place the attachment onto the drive unit
and secure it by turning it in clockwise
direction.
Battery pack and battery disposal
your domestic garbage. All batteries must be
10
Remember to protect our
environment.
Do
dispose of the rechargeable
Ni-Mh
battery
contained in the hair
trimmer, nor the battery of
the nose hair trimmer, in
not
pack

Publicité

loading