Velleman EMDIN02 Mode D'emploi page 3

play with the device. Cleaning and user maintenance shall not be
made by children without supervision.
• A qualified technician should install and service this device.
• The measurements provided by this device are for information
purposes only.
Description
Refer to the illustrations on page 1 of this manual.
This single phase DIN rail kWh meter is a new generation of single
phase electronic watt-hour meters, adopting micro-electronic
techniques, LSI circuits and advanced digital and SMT techniques.
The meter is in conformity with the relevant technical requirements
of Class 1, Class 2 and IEC62052-11, IEC62053-21. It accurately and
directly measures 50/60 Hz active energy consumption from single
phase AC electricity net.
Installation
This device must be mounted on a DIN-rail.
Interconnection to accessories and other equipment
Direct type, no interconnection to other equipment.
Reset
To reset the device, keep your finger on the infrared eye (marked
Reset) for 3 to 12 seconds.
The upper row will reset to zero.
The lower row shows the total of kW/h permanently.
Connections
Refer to the illustrations on page 1 of this manual.
• 20-21: counter outputs (see technical specifications for details)
• 23-24: not used
Technical Specifications
voltage
current
accuracy class
frequency
display mode
power consumption
V. 09 – 04/01/2022
EMDIN02
230 V
5 (80) A (1)
1.0
50/60 Hz
LCD 5+1 = 99999.99 kWh
≤ 0.4 W (8 VA)
3 ©Velleman Group nv