ProDuCt sPeCiFiCAtioNs
Switch .........................................................Variable Speed
Stroke Length ........................................................... 1/2 in.
No Load Speed .................................. 0-3,500 /min. (SPM)
KNoW Your reCiProCAtiNG sAW
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BArreL-stYLe GriP
The barrel-style grip of this saw is designed for one-handed
use only.
eXterNALLY ACCessiBLe BrusHes
Externally accessible brushes extend the life of the saw.
uNPACKiNG
This product has been shipped completely assembled.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WArNiNG:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1-877-617-3501 for assistance.
PACKiNG List
One-Handed Reciprocating Saw
Saw Blade
Tool Bag
Operator's Manual
tABLe oF CoNteNts
FeAtures
tABLe Des mAtiÈres / ÍNDiCe De CoNteNiDo
tABLe oF CoNteNts
AssemBLY
tABLe Des mAtiÈres / ÍNDiCe De CoNteNiDo
Page 8 — English
Input ..................................120 V, AC only, 60 Hz, 4 Amps
Net Weight ................................................................. 4 lbs.
LeD LiGHts
The saw has built-in LED worklights that illuminate when
the switch trigger is depressed. This feature is convenient
when working in close or tight areas where additional light
is needed.
tooLLess BLADe CLAmP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
vAriABLe sPeeD sWitCH triGGer
The variable speed switch delivers higher speed with in-
creased trigger pressure and lower speed with decreased
trigger pressure.
WArNiNG:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WArNiNG:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WArNiNG:
Do not connect to power supply until assem-
bly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.