Symbols - Power Stroke PSL1RS01 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
sYmBoL siGNAL
DANGer:
WArNiNG:
CAutioN:
notice:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the product better and safer.
sYmBoL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
No Hands Symbol
V
Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
n o
No Load Speed
Class II Tool
.../min Per Minute
tABLe oF CoNteNts

sYmBoLs

tABLe Des mAtiÈres / ÍNDiCe De CoNteNiDo
meANiNG
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor
or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an injury
hazard, such as a situation that may result in property damage.
NAme
Page 6 — English
DesiGNAtioN/eXPLANAtioN
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the blade will result in serious
personal injury.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute