Technical Data; Declaration Of Conformity; Safety Instructions - Wolf FLAMENCO D Traduction Du Mode D'emploi Original

Comes with:
Grinding machine Samb
a Tool kit
Operation manual
Check the power cord and the plug before starting. Bot
h of them must be in perfect condition, the insulation
must not be damaged.
Use this machine only
as instructed in this operating manual
with the machine in perfect working order.

1.0 Technical data

Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230V 50 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . .1600 W (230 V)
Noload speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 /min
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . .54 dB(A)
Sound energy level . . . . . . . . . . . . . . . . . . . . . . . . . . .67 dB(A)
Hand/ArmVibration . . . . . . . . . . . . . . . . . . . . . . . . . .< 4,5 m/s
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 kg
Diameter of discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375 mm
2.0

Declaration of Conformity

We declare under our sole responsibility that this product is in
conformity with the following standards of standardization docu-
ments:DIN EN 1037, EN ISO 12100, DIN EN 602041, DIN EN
607451, DIN EN 550141, DIN EN 550142
according to the provisions of the: 2006/42/EC, 2004/108/EC,
2006/95/EC.
Dipl.Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the
gathering of the technical documentation.
13.07.2012, on behalf
WOLFF GmbH & Co. KG | D74360 Ilsfeld | Ungerhalde 1

3.0 Safety instructions

Disconnect the power supply before any maintenance is carried
out. Use only recommended mounting discs and brushes. The
mounting discs must have a plain surface.
Use only genuine WOLFF discs and brushes. Other parts could
affect the safety of the machine. Maintenance should be under-
taken only by qualified personnel. Use only genuine Wolff spare
parts. Use only appropriate detergent liquids.
Have damaged insulation repaired at once, before starting the
machine. Otherwise this may result in considerable danger to
the user. See supplementary sheet "General safety instructions
"
3.1 Introduction
This operating manual should be used to get the most benefit
from your Grinding machine
instructions will both extend the life of your machine and reduce
repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The Grinding machine SAMBA is designed to the highest
technical
standards. Incorrect use can be dangerous! Disturbances that
could impair safety, have to be eliminated at once.
SAMBA. Following these
2