Technical Description - Dometic TL200 Notice D'utilisation

Technical description

6 Technical description
The refrigeration container can cool and deep-freeze goods at a constant tempera-
ture of +4 °C and –18 °C (TL200, TL300, TL450, FO650) or cool at +4 °C
(FO200NC, FO450NC, FO800NC, FO850NC, FO1000NC). A maintenance-free
refrigerant circuit with compressor provides the cooling.
Depending on the model, the refrigeration container can operate on an AC or DC
power supply.
The refrigeration container has a lock on the lid (not FO800NC, FO1000NC) and a
holder for the fastening strap.
Additional modules (optional)
Additional modules must be fitted on the container at the factory:
• The DT-23 automatic heating and cooling function is designed to operate the
container at a constant, individual temperature (according to customer require-
ments). The possible range is from +4 °C to +20 °C. The storage room is auto-
matically cooled or heated to the set temperature.
I
NOTE Heating with DT-23
If the outside temperature is below the temperature set on the device,
the heating function is automatically switched on. The heating function
is only available with DC power supply.
• The lead gel battery module DT-24 is a mobile power supply for refrigeration
containers if an external power source is not available. The lead gel battery pro-
vides DC power (12 V). Only the MCA1235 charger supplied may be used to
charge the lead gel battery.
• The wheel set DT-25 (not for FO 650, FO 850NC) is installed under the con-
tainer in place of stands.
• The metal pallet DT-31 for FO850NC, FO1000NC is mounted under the con-
tainer to allow an easier transport with a forklift (fig. 3, page 5).
• The 24 V DC module DT-32 is designed for operating on a DC (24 Vg) and
AC power supply.
18
TL, FO
EN