Troubleshooting - JVC KD-DB67 Manuel D'instructions

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", "NO SIGNAL", or
other information (eg. station name) appears.
DAB Service name Title/Artist
name Day/Clock
FM or AM Frequency Day/Clock
(For FM Radio Data System stations only)
Station name (PS)
Day/Clock (back to the beginning)
CD or USB (For CD-DA)
Playing time Day/Clock
(back to the beginning)
(For MP3/WMA/AAC/WAV/FLAC files)
Playing time Day/Clock
Folder/file name
USB-IPOD Playing time Day/Clock
or ANDROID (back to the beginning)
AUX AUX Day/Clock
BT AUDIO BT AUDIO Day/Clock
16
Dynamic Label Segment (DLS)
(back to the beginning)
Frequency Program type (PTY) Radio text+
Disc name Track title
Album title/Artist Track title
(back to the beginning)
Album title/Artist Track title

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
Ensemble
WIRING THEN PWR ON"
appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
DAB reception is poor.
"CHK ANTENNA"
"RELATED SRV FOUND"
• Radio reception is poor.
• Static noise while
listening to the radio.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
Send the unit to the nearest service center.
Check the [SRC SELECT] setting. ( 4)
Make sure [ON] is selected for [DAB ANT PWR].
( 9)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT PWR] to [OFF].
( 9)
• Press the volume knob to activate Soft-Link. ( 9)
• Press to cancel.
Connect the antenna firmly.