Dometic CAM35 Mode D'emploi page 16

Fitting the camera
Legend to fig. b, page 7 and fig. c, page 7:
No. Description
1 6-pin connection cable for reversing camera
2 Y-adapter camera
3 Monitor
4 Y-adapter monitor
5 System cable
6 6-pin connection cable for long-distance camera (only CAM35 TWIN)
7 NAV adapter (only CAM35 NAV)
ws white, video signal 1
ge yellow, video signal 2
sw black
rt red
6.4 Fitting the camera
A
NOTICE!
Make sure to guide the camera cables in the console bottom up to the
notches so that the cables are not pinched.
Proceed as follows (fig. e, page 8):
➤ Secure the brake light and the console with two 6 x 25 mm fastening screws.
16
CAM35
EN