en
The Park System allows you to conveni-
ently park the suction tube and floor-
head during pauses.
Slot the floorhead or floorbrush into
the parking attachment on the va-
cuum cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
Park system for storage (dia. 23)
Always disconnect the vacuum
cleaner from the power supply when
you have finished using it. Switch off
at the wall socket and unplug it.
Stand the vacuum cleaner upright.
Retract the telescopic tube fully.
Slot the floorhead downwards into
one of the parking attachments on
either side of the vacuum cleaner (the
parking attachments cannot be used
with the Electrobrush).
This makes the vacuum cleaner easier
to carry or store.
Maintenance
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
The Miele filtration system consists of
three components:
– Original Miele dustbag (type GN)
– Motor protection filter
40
– Original Miele exhaust filter
These will need to be replaced from
time to time to ensure that your vacuum
cleaner performs efficiently.
We recommend using only dustbags,
filters and accessories bearing the
"ORIGINAL Miele" logo on the pack-
aging. Only these will guarantee the
optimum performance of your va-
cuum cleaner and the best possible
cleaning results.
Dustbags with the "ORIGINAL Miele"
logo on the packaging are not made
from paper or paper-based materials
and nor do they have a cardboard
collar. This is why our dustbags are
particularly long-lasting and reliable.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not
covered by the vacuum cleaner war-
ranty.
Purchasing dustbags and filters
Original Miele dustbags and filters are
available from the Miele webshop, the
Miele Spare Parts Department and your
Miele dealer.
Original Miele dustbags and filters are
identified by the "ORIGINAL Miele" logo
on the packaging.