2. Intended Use
The MPA - M.A.R.L.I.S. MkIII active PA set is used to amplify audio signals from audio systems and to convert these
over the speakers in audible sound waves.
The inputs must only be connected to low-level audio outputs of audio devices.
Only suitable passive speakers can be connected to the speaker outputs.
This product is only approved for connection to 220-240V~/50-60Hz DC and only for use with an earthed mains
socket.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided.
Any other use than that described above will lead to damage to the product and involves other risks, such as short
circuit, fire, etc.
No part of the product must be modified or converted in any way. Do not open the casing.
The safety information must be observed at all times.
Observe all safety and assembly notes in these operating instructions!
3. Explanation of Symbols
The lightning symbol in a triangle warns against unprotected live components or elements
inside the housing or "live" connection points. Touching these components or connection
points may pose a danger to life.
Lines must only be connected to such connection points by specialists, or lines ready for
connection must be used.
The device contains no parts that require servicing by the user. Therefore, never open the
device.
The exclamation mark symbol indicates that the user must read these operating instructions
before commissioning of the device, and observe them during operation.
22