Firefly Scooot Mode D'emploi page 19

2
Use in the Scoot configuration
Before using Scoot, secure and adjust
all components as recommended in
Section 9.2 and check elastic straps
for any sign of damage, wear or tear.
If there is any damage, do not use the
product and contact Customer Services
for advice. Position Scoot so that it
will not move whilst your child
transfers in to it.
Hold it steady or place it against a
wall for extra support.
Ensure the backrest is attached
securely by following the assembly
instructions in Section 9.2 Step 3.
Open the belt and position your child so
that their back is against the backrest.
Secure the belt around the child's
waist. Clip together and pull the two
D-rings away from the centre buckle to
tighten the belt, ensuring the webbing
does not become twisted.
When using the Scoot, your child may
propel themselves backwards, forwards
or sideways using their legs. Remember
there are no brakes on the Scooot,
so use it on a flat surface. Supervise
your child to ensure they do not reach
underneath towards the casters.
Scooot User Manual p19
Ensure your child
is comfortable and
stable in the Scoot
configuration before use.