Inserting The Battery - Dörr DANUBIA DJE-400 Notice D'utilisation

1. Reticle – To target the object
2. Distance indication – Indicates the distance with 3 digits.
If measurement fails, 3 dashes --- will appear.
3. Measuring unit indication – Indication in meters or yards selectable
4. Measuring mode indication – RAIN/REFL/> 150 mn
(standard mode is not displayed)
5. Metering quality indication – The more arrows appear, the better the
refl ection was while measuring
6. Laser indication – Lights up when laser is active
7. Battery indication – Lights up when the battery becomes weak

INSERTING THE BATTERY

To open the battery compartment we recommend a coin. Screw o the battery
compartment turning in arrow direction. Insert a CR2 battery according to the pola-
rity marking inside the battery compartment lid. Screw on the battery cover again.
HOW TO USE
Power up
1. Look through the eyepiece and turn the eyepiece ring (1) until the object
becomes clear.
2. Press the start button (3).
Setting of the di erent measuring modes
If no mode is displayed in the measuring mode indication (4) laser rangefi nder is in
standard mode. To choose a di erent measuring mode, press the mode button (2)
to select the 4 various measuring modes:
RAIN:
REFL:
>150 m:
14
Useful for rainy days to measure distances of
more than 60m
Recommended in case of dust and smog
In case of larger distances, small disturbing objects such