Pool Blaster Speed Vac Turbo Manuel De L'opérateur page 8

English
Specifications
Battery charger Input.....................................................................100-240V-50-60Hz, 400mA Maximum
Battery charger Output.........................................................................................................8.4V,
Battery Technical Data.................................................................7.4V, 2200mAh, 16.28Wh, 2S1P Li-Ion
Water temperature range....................................................Maximum 96°F, (35°C) Minimum 40°F, (5°C)
Operation Depth..........................................................Maximum 9.8 ft. (3.0 m), Minimum 10 in. (0.25 m)
Charge temperature.....................................................Maximum 100°F, (37.7°C) Minimum 50°F, (10°C)
A Charging Your Cleaner
Initial Charge 4 Hours
Recharging (After Complete Discharge) 4 Hours
Maximum charging time should not exceed 24 Hours
Attaching the Vacuum Head
B
Adapter & Vacuum Head
C
Attaching the Pool Pole
D
Turning the Cleaner ON & OFF
Cleaning the Filter Bag
• You should remove and clean the Filter Bag following each use (Figure E.2).
• Don't scrub the bag against itself while rinsing it.
Long Term Storage
• Always clean the Debris Chamber and Filter Bag before storing.
• Always store and charge your cleaner in a cool, dry indoor shelter.
• Recharge the cleaner indoors for 4 hours after each month of inactivity.
• Never leave your charger connected to the cleaner for more than 24 hours.
Frequently Asked Questions
Q: Can my cleaner be run out of water?
A: Yes, for a short period of time when you
turn it on before submerging into your pool.
Q: When I am cleaning my pool, how do I know
when the cleaner is out of battery power?
A: Most people can feel the cleaner is running through vibration
in the vacuum pole or handle. To be sure, you can lift it out of the
water to hear if it is running.
Q: How often should I clean out my cleaner's filter assembly/debris chamber?
A: You can clean your filter assembly and debris chamber as often as you like with
no ill effects. The filter bag can then be turned inside out and rinsed with a hose or a
sink. Do not wash it in a washing machine or with detergent. For best results, rinse it
after each use, or whenever you notice the performance of your cleaner declining.
Only use the battery charger supplied with the cleaner.
7
E
Maintenance
1.
Removing the Debris Chamber
2.
Removing & Cleaning the Filter
Assembly
F
Reassembling the Debris Chamber
& Filter Assembly
Q: Can I leave the cleaner in the pool when not
in use? A: No. The cleaner should be removed
from the pool and stored in a clean, dry place when
not in use. This will increase the life of your cleaner
and its accessories.
Q: What if my cleaner doesn't power on?
A: Make sure your cleaner has a full charge of 4
hours. Before charging it, make sure the charging
metal contacts are clean and dry.
Environmental Recycling Programs USA
1.A
Help protect the environment.