Termozeta MATICA 3000 Manuel D'utilisation page 15

• Turn the knob (2) to OFF to turn off the appliance and remove the plug from the wall
outlet.
• Remove the plug from the outlet.
• Press the button (12) to automatically wind up the power cord in its seat: when you do
this, we recommend that you guide the power cord with your hand while it is rewinding.
If the power cord is not completely wound, pull it out again and repeat the operation.
• Rest the iron on the base (8) and wait for the appliance to cool down before doing
anything else to it.
FOR DRY IRONING
• Place the appliance on a stable horizontal surface.
• Place the iron on the base (8) of the boiler body.
• Turn the selector knob (2) to the iron only position to turn on the iron
• Turn the knob (18) on the iron (Figure 1) to the desired temperature.
• Unwind the entire length of the power cord (11) and insert the plug into the wall socket.
• The indicator light (3) on the boiler body lights up and stays on as long as the power
cord plug is inserted in the wall outlet.
• When the indicator light (19) on the iron turns on, the appliance is ready for ironing.
• During use, the indicator light (19) on the iron turns on and off automatically, indicating
that the plate temperature is being kept constant.
• When done ironing, turn the knob (2) to OFF to turn off the appliance and remove the
plug from the wall outlet.
CLEANING
ATTENTION!
Before cleaning, remove the plug from the wall outlet and wait for the appliance
to cool completely.
To clean the plate, use an ordinary damp sponge.
To clean all other parts of the iron and the boiler body, use only a damp cloth.
Never immerse the appliance, or parts of it, in water or other liquids and do not use
steam, chemicals or abrasives.
ENGLISH