Warnings - SQuape MECANIC Manuel D'utilisation

7. Warnings

– Please read the user manual and warnings
carefully before first use.
– Only use atomisers with a 510 pin that
protrudes at least 1mm from the 510
threads and has a fix 510 pin.
– Always install the battery with the positi-
ve towards the button.
– Keep the SQuape MECANIC dry.
– The upper switch unit with the four
contacts and the ematalised plate cannot
be disassembled!
– Regularly check your battery voltage
with a charger to make sure not to
over-discharge your batteries. Maximum
discharge voltage of your battery: 3.2V.
Use below this voltage is at your own risk.
StattQualm cannot be held responsible
for overstressing the battery. If anything
is uncertain, contact a specialist.
– Only use this device to power atomisers
for the vaporisation of e-liquid from
trusted sources or as power source for
your light saber.
– Not suitable for children. Keep the device
away from children! Additionally, this
device is not suitable for use during
pregnancy.
– If debris enters the button assembly, stop
using the device until you have cleaned it
according to the user manual.
– Use of a too low resistance can cause
thermal battery runaway. StattQualm can-
not be held liable in case of inappropriate
or incorrect use.
– The SQuape MECANIC and accessories
thereof are only distributed by authorised
partners of StattQualm. The warranty is
only valid for original products made by
StattQualm GmbH.
– Only use genuine accessories by
StattQualm. Accessories made by other
manufacturers are exempt from warranty
by StattQualm GmbH.
– Please visit http://shop.squape.ch/en/
general-terms-and-conditions for infor-
mation about warranty and the general
terms and conditions.
- General warnings starting from page 14.
Further information can be found at
www.squape.ch
13