Scope Of Usage; Carton Contents; Specifications - SQuape MECANIC Manuel D'utilisation

2. Scope of usage

We recommend that the SQuape MECANIC
is only used with high-ampere batteries with
an Ampere rating of at least 20A, and that
the resistance of the coil installed in your
atomiser is not less than 0.3 ohm. Please be
advised that a too low resistance can lead
to battery failure. Be aware that the usage
of the SQuape MECANIC is at your own risk.

3. Carton contents

1x SQuape MECANIC
1x Battery adjustment screw
1x 18650 adapter tube
1x Spare magnet
spare o-rings
1x User manual

4. Specifications

4.1. Data
– Diameter: 25 mm
– Height: 87.9mm
– Weight: 101g (without battery)
– Threads: 510
– Battery compatibility: 18650, 20650,
20700, 21700
10
4.2 Materials
Here at StattQualm we feel strongly about
what materials we use and therefore only
the best materials make it into our devices.
The following table shows what materials
are used in the SQuape MECANIC.
Should you have known allergies to one of
the listed materials we strongly suggest you
do not use this mechanical mod.
Stainless steel components: Steelnumber
1.4404 / 316L; switch mechanism: Alu-
minium ematalised; switch contact pins
and button: brass gold-plated; magnets:
Neodymium; O-rings: nbr 70 shore; 18650
adapter tube: POM
4.3 Features
– Fits multiple battery sizes through use of
different length adjustment screws.
– Easy battery fixing due to adjustable
battery contact
– Best conductivity through use of highly
conductive materials
– Virtually no volt-drop through clever
non-moving contact points in the switch
mechanism.
– 4 point contact system
– Soft pressure point for comfortable
activation
– Recessed button to reduce risk of auto
firing