Changing The Remote Control Battery; Power Supply Using A Usb Cable - Maxx-world S04 Mode D'emploi

EN

Changing the remote control battery

3. Slide the battery compartment all the way back into the
remote control. It must audibly and noticeably lock into
place.

Power supply using a USB cable

Before connecting the article to a power source by USB
cable you should remove the batteries.
If the article is to be operated with the USB cable that is also
supplied, connect the end with the micro USB connector to
the micro USB connection socket on the article and connect
the other end to a socket via a suitable mains adapter (not
supplied with the article).
16
1. The battery compartment is lo-
pull
2. Remove the empty battery and
push
cated on the narrow side of the
remote control. Remove it as
shown.
insert a new battery (3 V, type
CR2025). The positive terminal
must point upwards.