Special Hazards; Labelling / Safety Marks - WIKA GCS-1 Mode D'emploi

2. Safety

2.4 Special hazards

WARNING!
Observe the information given in the applicable type examination
certificate and the relevant country-specific regulations for installation
GB
and use in explosive atmospheres (e.g. IEC 60079-14, NEC, CEC).
Non-observance can result in serious injury and/or damage to equipment.
For additional important safety instructions for instruments with ATEX
approval see chapter "2.3 Additional safety instructions for gas cylinder
scale per ATEX".
WARNING!
For hazardous media such as oxygen, acetylene, flammable or toxic
gases or liquids, and refrigeration plants, compressors, etc., in addition
to all standard regulations, the appropriate existing codes or regulations
must also be followed.
WARNING!
Residual media in dismounted instruments can result in a risk to persons,
the environment and equipment.
Take sufficient precautionary measures.

2.6 Labelling / safety marks

Product label
Output signal
Power supply
P# Product no.
S# Serial no.
8 WIKA operating instructions gas cylinder scale model GCS-1
Measuring range
Pin assignment
Date of manufacture