7. Setting the Amount of Set Back Operation
1 Press the [SET/MONITOR] button and select the "SET" Mode.
2 Press the [SET BACK] button, then set the amount of set back.
• Each time the [SET BACK] button is pressed, the amount of set back becomes 1°C (2°F) greater. The
amount of set back can be set at 1, 2, 4, 6 and 8°C (2, 4, 8, 12 and 16°F). If it is advanced to 8°C
(16°F), it returns by 1°C (2°F).
3 When the setting operation is completed, press the [SET/MONITOR] button and return to the "MONI-
TOR" mode.
In the "Monitor" mode, if the set back pattern has not been set by the Daily Timer setting method in item
6, the set back amount is not displayed.
4 During set back operation, the set temperature display on the standard remote controller changes.
* Set Back Operation
In this operation, a time interval when the air conditioning load becomes lower is designated, and during this
time interval, the temperature during air conditioning is set so that it is several degrees higher than the
normally set temperature, and during heating, the temperature is set so that it is several degrees lower than
the normally set temperature. Through this kind of operation control, running costs can be reduced. The
amount of set back can be set at 1, 2, 4, 6 and 8°C (2, 4, 8, 12 and 16°F).
Example) In the case of hotel air conditioning, etc., with 24-hour operation
8:00 ~ 23:00
23:00 ~ 8:00
As shown in the graph at right, during the time
specified for set back, the thermostat setting rises
automatically by 2°C (4°F). The setting then re-
turns to the normal setting after the set back time
is ended.
I
I
I
S
M
T
SET
L
L
L
M O NIT O R
SET/MONITOR
MODE A/B/OFF
WEEKLY SETTING
CLOCK
PAC-YT32PTA
13
Air conditioning system operation setting 26°C (79°F)
Set Back Operation
Set Back Amount:
2°C (4°F)
MODE A MODE B
I
I
I
I
W
T
F
S
L
L
L
L
0
3
6
9
12
15
18
21
SET BACK
DAY
SET BACK
DAILY TIMER MODE A/B
ON/OFF/SET BACK
L
TODAY
DAILY SETTING
2
28°C (83°F)
26°C (79°F)
8:00
Normal air
conditioning
system operation
12
24
23:00
8:00
Set back air
Normal air
conditioning
conditioning
system operation
system operation
9