Specific Precautions - Mitsubishi Electric PAC-YT32PTA Manuel D'utilisation

Specific Precautions

I Ask your dealer or technical representative to install the unit.
• Any deficiency caused by your own installation may result in an electric shock or fire.
I Securely install in a place which can withstand the weight of the controller.
• If it is not enough, the controller may drop and cause an injury.
I Make sure that the controller is connected to a rated power supply.
• If the controller is not connected to a rated power supply, it may cause a fire or damage to the controller.
I Stop the operation if any malfunction occurs.
• Contact the your dealer or technical representative immediate. If the controller continues to operate after a mal-
function occurs, this may cause damage, electric shock or fire. If malfunction occurs (burning smell, etc.) stop the
operation and turn off the power supply.
I Ensure that installation work is done correctly following this installation manual.
• Any deficiency caused by installation may result in an electric shock or fire.
I To dispose of this product, consult your dealer.
I Never modify or repair the PAC-YT32PTA by yourself.
• Any deficiency caused by your repair may result in an electric shock or fire.
Consult with your dealer about repairs.
I Stop the operation immediately and notify the your dealer if an error code is displayed or malfunction occurs.
• Fire or damage may cause it the controller is operated in this condition.
I Do not install in any place exposed to flammable gas leakage.
• Flammable gases accumulated around the body of PAC-YT32PTA may cause an explosion.
I Do not wash with water.
• Doing so may cause malfunction.
I Do not touch any control button with your wet hands.
• Doing so may cause malfunction.
I Do not use the controller for special applications.
• This product is designed for use with the CITY MULTI CONTROL SYSTEM. Do not use the system for other air
condition management operation or applications. It may cause malfunctions.
I Do not apply insecticide or flammable sprays to the controller.
• Do not place flammable spray near the controller and make sure it does not blow directly on the controller as this
may cause in fire.
I Do not use in any special environment.
• Using in any place exposed to oil (including machine oil), steam and sulfuric gas may deteriorate the performance
significantly or give damage to the component parts.
I Do not press any control button using a sharp object.
• It may cause damage and trouble.
I Operate the controller within the specified temperature range.
• Observe the specified temperature range when operating the controller. If the controller is used outside the speci-
fied temperature range, it may cause serious damage. Be sure to check the operation temperature range in the
operation manual.
WARNING
CAUTION
3