Care And Maintenance; Warranty Disclaimer; Service And Support - Hama Wireless Charging Mode D'emploi

• Place the rear of your smartphone onto the mouse pad's charging surface (2).
• Charging starts as soon as an effective induction eld has been generated.
• The current charging status appears on your smartphone.
• If no connection can be established through induction, you may have to change the
position of your smartphone.
• Charging stops automatically once your smartphone's battery is fully charged.
• Remove your smartphone from the mouse pad and disconnect the mouse pad from the
power supply.
• Connect the Micro-USB cable supplied to the Micro-USB input (1) on the 'Wireless
Charging' mouse pad and to a suitable USB charger. Please refer to the operating
instructions for the USB charger used.
• The charger used should have an output current of at least 2000 mA.
• The green status LED (2) lights up brie y to indicate successful connection to a power
supply.
Note
Disconnect the device from the power supply before cleaning or if it will not be used for a
long period of time.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.

6. Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.

7. Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here:
www.hama.com
4