Setup - Elipson Chroma 200 Mode D'emploi

IV. SETUP
1. PREPARATION
During transport, the removable lid and the various elements of the turntable are secured
by foam wedges.
• Carefully remove the protective foams of the plate (1 & 2), the tonearm (3), and the counter
weight.
(4). Then gently remove the protective foam of the motor pulley (5), and the foam wedge
located under the pulley (6).
6
• Carefully remove the plate (pay attention to its weight) in order to remove the protective
foam of the chassis. Then reposition the plate back on its axis.
• Position the lid above the plate, and adjust the two hinges in the appropriate rooms.
Carefully check the orientation of the hinges and the proper fit of the lid on the plate.
Press firmly to ensure good holding of the lid.
5
1
25
4
2
3