Storage And Transport; Removal Of Parts; Technical Specifications; Structure - lopital Lotus Mode D'emploi

5. Storage and transport

During transport and storage, the ambient conditions must remain moderate. In other
words, the temperature should remain between -40 and +55 degrees Celsius (-40 to
130 degrees Fahrenheit) and humidity levels should be kept as low as possible. Vibration
during transport must be kept to a minimum in order to avoid damaging the hinged
mechanisms on the Lotus.

6. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.

7. Technical Specifications

The Lotus is splash-proof. This is indicated by the IPX4 mark.

7.1. Structure

Frame:
Foot plates:
Weight:
Maximum permitted load:

7.2. Dimensions

Surface area:
24 | Instructions for use | Lotus Active standup aid
Stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
Plastic V0
35 kg / 77.2 lbs
200 kg / 440.9 lbs
Wide: 68 cm / 26.8 inch narrow position
95 cm / 37.4 inch with base spread out
Deep: 98 cm / 38.6 inch