Specifications - Pioneer PRS-D3000SPL Mode D'emploi

Specifications

Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption ........................................................................................................ 42 A (at continuous power, 4 Ω)
Average current drawn* .......................................................................................................... 8.3 A (4 Ω for one channel)
Fuse (external) ............................................................................................................................................................ 100 A
Dimensions ...................................................................................................................... 300 (W) × 64 (H) × 279 (D) mm
Weight .................................................................................................................... 5.9 kg (Leads for wiring not included)
Maximum power output ........................................................................................ 1,000 W × 1 (4 Ω) / 2,000 W × 1 (2 Ω)
Continuous power output ................................................ 800 W × 1 (4 Ω) / 1,400 W × 1 (2 Ω) (DIN45324, +B=14.4 V)
Load impedance .................................................................................. 4 Ω (2 — 8 Ω allowable), (Ex. Bridge 4 — 16 Ω)
Frequency response .............................................................................................................. 10 — 240 Hz (+0 dB, –1 dB)
S/N ratio ........................................................................................................................................ 90 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.05 % (50 W, 100 Hz)
Low pass filter ................................................................................................................ Cut off frequency: 40 — 240 Hz
Subsonic filter (HPF) .............................................................................................................................. Frequency: 20 Hz
Bass boost ................................................................................................................................................ Level: 0 — 12 dB
Phase control ........................................................................................................................................ SYNC, SYNC INV
Gain control .............................................................................................................................................. 200 mV — 6.5 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 kΩ
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
9.0 A (2 Ω for one channel)
Cut off slope: –24 dB/oct
Slope: –18 dB
Frequency: 40 — 120 Hz
14