Hema 80.00.5003 Mode D'emploi page 17

PARTS DESCRIPTION
1. Adjustable speed control
2. On/off button
3. Turbo button
4. Motor unit
5. Stainless steel shaft
6. Lid of chopper
7. Stainless steel blade
8. Chopper bowl
9. Non-skid-mat
10. Measuring cup
BEFORE FIRST USE
1. Carefully unpack the appliance and remove all packaging materials.
2. Clean the accessories of your appliance in warm soapy water, rinse and dry thoroughly before use.
INSTRUCTION FOR USE
Use of blender: It is suitable for blending vegetables and fruits.
1. Turn the motor unit clockwise to lock it with the stainless steel shaft. Make sure the arrow icon is pointing to
the locked icon on the joint side.
2. Plug in the hand-held blender to a suitable power outlet.
3. Lower the hand-held blender into food. You can operate the unit in any bowl or food container.
NOTE: The maximum capacity of the measuring cup is 700ml. It is ideal for taking measurements and also
suitable for preparing small quantities of processed food.
4. Use the adjustable speed control to select your desired speed setting, and then press and hold the on/off button
to run the appliance. You can also press and hold the turbo button to inject additional speed into the blending
process.
5. To stop working, just release the on/off button. After use, unplug the appliance.
IMPORTANT! Do not continuously operate the appliance too long. The motor may overheat. Do not allow the
appliance to operate more than 30 seconds at one time. 60 seconds rest time must be maintained between two
consecutive cycles.
Use of chopper: It is suitable for chopping meat and making garlic paste.
1. Place the copper bowl on a clean and level surface.
2. Assemble the stainless steel blade into the chopper bowl. Make sure it fits properly on the base shaft. CAUTION!
The blade is very sharp. Handle with care to avoid any cuts. Always handle the plastic shaft.
3. Place food into the bowl and cover with lid. Turn the lid clockwise to have it locked into place.
NOTE: Remove the bones of meat, cut meat into small pieces and then place the meat into the bowl. The
maximum quantity of meat cannot exceed 200g in every blending. Pay attention to the MAX level on the bowl.
4. Insert the motor unit onto the chopper lid; turn the motor unit clockwise to have it locked with the lid. Make
sure the arrow is pointing to the locked icon.
5. Plug in the appliance. Use the adjustable speed control to select your desired speed setting, and then press and
hold the on/off button to run the appliance. You can also press and hold the turbo button to inject additional
speed into the blending process.
6. To stop working, just release the on/off button. After use, unplug the appliance.
- 16 -