Electrical Connections; Grounding Instructions; Wiring Requirements; Extension Cords - Haier WDNS32BW Guide De L'utilisateur

COLD (GREEN) / HOT (RED) WATER INDICATOR LIGHTS
When the green and red lights are illuminated on the front of the unit, the heating
and cooling process is in progress. When the cold and hot water has reached
their proper temperatures, both lights will turn off automatcially. Normally, hot
water reaches proper temperature first.
WDNS115BW
ELECTRICAL CONECTIONS

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This appliance is equipped with a cord containing a grounding
wire and a grounded plug. The plug must be inserted into an outlet that is prop-
erly installed and grounded.
• Improper use of the plug may result in the risk of electric shock.
• Consult a qualified electrician or service technician if the grounding
instructions are not completely understood or if in doubt as to whether
the appliance has been properly grounded.

WIRING REqUIREmENTS

This appliance must be plugged into a 15Amp, 115 Volt, 60Hz
GROUNDED OUTLET.
Note: Where a standard two-prong outlet is encountered, it is the personal
responsibility and obligation of the consumer to have it replaced with a
properly grounded three-prong outlet.

ExTENSION CORDS

We do not recommend the use of an extension cord with
this unit.

POWER INTERRUPTIONS

Occasionally, there may be power interruptions due to thunderstorms or
other causes. Remove the power cord from wall outlet when a power out-
age occurs. When power has been restored, re-plug the power cord into
wall outlet.
HOT
HOT
POWER
COLD
COOL
WDNS32BW
English
8