for Living 068-0485-6 Instructions De Montage page 16

Step-by-step Guide
Step 10
REQUIRES PART 96
1 - With your pencil, strike a mark through the center of the
hole in the SAFETY STRAP. Drill a 3/8" hole on
the mark.
2 - While you squeeze the wings together, gently tap the
WALL ANCHOR from the FURNITURE TIPPING RESTRAINT
KIT (96) into the hole until it is even with the surface of
the wall.
3 - Turn the LONG SCREW through the hole in the
SAFETY STRAP and into the WALL ANCHOR.
NOTE: You will need to turn the LONG SCREW multiple
turns to completely tighten and secure your unit to the wall.
Mark and drill
a 3/8" hole into
the wall.
Wing
While you squeeze the wings
together, gently tap the WALL
ANCHOR into the hole in the wall.
Wing
16
Secure to wall with WALL ANCHOR
2
3
1
X1 X1
96 96