for Living 068-0485-6 Instructions De Montage page 15

Step-by-step Guide
Step 9
REQUIRES PART 96
Carefully stand your unit upright. Place your unit in its fi nal
location against the wall.
1 - Use the FURNITURE TIPPING RESTRAINT KIT (96) for
added stability. Fasten the STRAP to the underneath
surface of the TOP (B) using the SHORT SCREW as shown.
The following instructions show your unit being fastened to
a wall stud. If you are not fastening your unit to a wall stud,
go to the next step now.
2 - Locate the center of a stud in your wall near your unit
and mark it with a pencil. Drill a 1/8" hole on the mark and
into the stud in your wall.
3 - Fasten the unit to the wall. Thread the LONG SCREW
through the other end of the STRAP and into the 1/8" hole.
Mark and drill
a 1/8" hole into
the wall stud.
2
Thread the short screw
through the hole in the
strap and into the TOP (B).
Secure to wall stud
3
1
X1 X1
96 96
X1
96
B
15