Outdoor Unit Installation - ITS EKSELANS KVP 1430 Manuel Utilisateur

EN
4.2. MAXIMUM RECOMMENDED LENGTH AND
CABLE CHARACTERISTICS
MON 43
MON 70
PE 1 / PE 2 60 m
MON 43 / MON 70 -
PE 1 / PE 2 80 m
MON 43 / MON 70 -
PE 1 / PE 2 100 m
MON 43 / MON 70 -
In any case, it is recommended not to esceed a distance of 100m
between the farthest devices.

4.3. OUTDOOR UNIT INSTALLATION

Fix the rain cover to the wall by passing the two-wires cable throu-
gh the hole.
These would be the standard mounting dimensions:
To show the postal address or the name of the resident on
the outer plate, remove the stainless steel plate and wri-
te on the supplied label (6,8 x 3,2 cm) the name.
Install the base of the plate into the space provided by the rain co-
ver, passing the two-wires cable. Remove the stainless steel plate to
adjust the angle of the camera and make the electrical connections.
92
SECTION
PFA 2415 AWG
CÂBLE
20 m
0,2 mm 2 23 - 24
50 m
30 m
0,5 mm 2 20
70 m
30 m
1 mm 17
2
100 m
(ONLY for PE1).
Pass the cables through the hole and make the connections. At this
point, have into consideration the possible passage of the external
opening push button and the electronic lock cables.
Adjust the camera angle.
Select the desired label to be displayed on the front. The white one
is designed to write the postal address or the name of the resident.
Place the connections space plastic cover, screw the panel into the
rain cover and finally, cover the panel with the stainless steel cover.
EN
93