English
EN
Electric Kettle
PARTS AND OPERATING CONTROLS
1 Kettle (with water level indicator)
2 Lid with lock
3 Lid release button
4 ON/OFF switch
5 Base
6 Cable tidy
TECHNICAL SPECIFICATION
Power input, W
Mains voltage, V
Frequency, Hz
Volume, L
Weight, kg
COMPLECTATION
Electric kettle
Base
Important: Use the kettle 1 only with its
included base 5.
● Only fi ll the kettle with water. Milk and
instant beverages will burn and damage
the appliance. Never operate the kettle
1 without water and do not overfi ll it;
observe the 0.5 and max markings. If the
kettle is too full, the water will boil over!
BEFORE USING FOR THE FIRST TIME
Remove any stickers or fi lm.
● Unroll the right amount of cable from the
cable tidy 6 and plug it in.
● Fill the kettle 1 with water. Bring the water
to a boil and discard it. Repeat the procedure.
This will make sure that the kettle is
clean for normal use.
● When the water comes to a boil for the
fi rst time, add a tablespoon of white
vinegar.
BOILING WATER
● Fill the kettle with fresh water through the
spout or the open lid 2 (press lid release
button 3).
● Read the quantity on the water level indicator.
Do not fi ll with less than 0.5 litres or
more than 1.7 litres of water!
● Close the lid 2 until it locks and place the
kettle 1 on the base 5.
● Press down the switch 4. The water is heated.
● The kettle switches off automatically once
the water has boiled.
The appliance can also be switched off
at any time by pulling up the ON/OFF
switch 4
N.B.: Only operate the kettle with the lid 2
closed otherwise the kettle will not switch off.
For physical reasons, the base 5 may
collect some condensation water. This is
normal; it does not mean that the kettle 1
2000
220-240
50-60
1,7
1,8
leaks.
After boiling, let the kettle cool down for
5 minutes before refi lling it with water.
Do not turn on the appliance if the kettle 1
is empty, otherwise the overheat control will
engage and the appliance will switch itself
off automatically.
CLEANING AND MAINTENANCE
Risk of electric shock!
Never immerse the device in water or place
it in the dishwasher!
Do not steam-clean the appliance.
● Before cleaning, unplug the appliance
from the power outlet.
● Clean the outside of the kettle 1 and base
5 with a damp cloth. Do not use strong or
abrasive cleaning agents.
● Rinse the kettle 1 with clear water.
DESCALING
Regular descaling
● makes your kettle last longer;
● ensures proper function;
● saves energy
Descale the kettle 1 with vinegar or a
commercial descaling agent.
● Fill the kettle 1 with water up to the 1.7
mark and bring to a boil. Next, add a
small amount of white vinegar and let it
sit for several hours. You can also use a
commercial descaling product and follow
the manufacturer's instructions.
● Rinse the kettle 1 with clear water.
Tip: If you use the kettle daily, descale
more frequently.
TROUBLESHOOTING
The appliance does not heat and the
ON/OFF switch 4 does not light up.
→The overheat control has tripped.
● Let the kettle 1 cool down for some time
so that the appliance can be switched on
again.
The unit turns off before the water comes to
a boil.
→The kettle contains too much scale.
● Descale the kettle as per the instructions.
5