Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Chain saw mounting kit
Cutter bar
Saw chain
Cutter guard
Hedge trimmer mounting kit
Guard for hedge cutter blade
Original operating instructions
Safety instructions

3. Proper use

Pole-mounted pruner (chainsaw with
telescopic handle)
The chain saw mounting kit is allowed to be used
only on the supplied motor head.
The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
Hedge trimmer
The hedge trimmer mounting kit is allowed to be
used only on the supplied motor head.
Caution! This hedge trimmer is suitable for cutting
hedges, bushes and shrubs. Caution! Do not use
this equipment to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GHH_E_20_Li_OA_SPK7.indb 24
Anl_GHH_E_20_Li_OA_SPK7.indb 24
GB

4. Technical data

Pole-mounted pruner
Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 170 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.050") 1.3 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed
at rated rpm: ...........................................3.76 m/s
Oil tank capacity: ................................... 125 cm3
Net weight without accessories: .................3.4 kg
Saw chain: ..............................Oregon 91P033X,
.......................................Kangxin 3/8 8050X33DL
Cutter bar: ....... Oregon 080NDEA041 (520089),
........................................ Kangxin AP08-33-507P
Hedge trimmer
Cutter bar length: ................................... 450 mm
Max. cutting length: ................................ 400 mm
Tooth spacing: .......................................... 16 mm
Cuts/min: ..................................................... 1700
Important!
The equipment is supplied without batteries and
without a charger is allowed to be used only with
the lithium-ion batteries of the Power-X-Change
series!
Power-X-Change
20 V, 1.5 Ah .............................. 5 lithium-ion cells
20 V, 3.0 Ah ............................ 10 lithium-ion cells
20 V, 4.0 Ah ............................ 10 lithium-ion cells
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Charging unit
Mains voltage ................... 200-250 V ~ 50-60 Hz
Output
Rated voltage ........................................ 21 V d. c.
Rated current ....................................... 3000 mA
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
- 24 -
06.11.15 06:54
06.11.15 06:54

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

34.108.31

Table des Matières