miniland baby Thermo Advanced Mode D'emploi page 21

Taking a Reading - Object
Taking the Temperature of an Object:
NOTE: Be sure the thermometer is set to measure the
temperature of an object.
1. If the thermometer is off, press the 'Power' button
to turn the thermometer on.
2. Press and hold the 'Measure' button.
The screen should appear like Fig. 8.
3. Aim the front of the
thermometer at the
the object, Fig. 9. Hold
the thermometer approximately
2" to 3" away from the object
and release the 'Measure' button.
4. The thermometer will beep
once and show the
temperature reading, Fig. 10.
The display will illuminate with
Nite-Glo technology for
®
3 seconds.
5. The thermometer will automatically beep and
shut-off after approximately one minute of non-use.
5 a 7 cm
35.0
fig.8
fig.9
°C
fig.10