Helpful Hints; Changing Modes - miniland baby Thermo Advanced Mode D'emploi

Helpful Hints

• For accurate results, wait at least 30 minutes after exercising, bathing or
returning from the outdoors.
• Wait at least 1 minute between readings.
• If multiple readings are taken over a short period of time, use the
average of those readings.
• Because everyone's temperature varies slightly, keep a record of your
body temperature to serve as a reference when judging a fever.

Changing Modes

Switching Between Person or Object
First determine whether you want to
measure the temperature of a person or
an object.
1. Press the (Power) button to turn on
the thermometer.
2. To switch between the measurement modes for a
person or an object, press the 'Mode' button, Fig. 1.
The symbol
symbol
Switching Between Fahrenheit or Celsius
1. Press the 'Power' button to turn the thermometer on.
2. Press and hold both the 'Mode' and 'Memory' buttons for
approximately 3 seconds. This will change the mode to
either °C or °F, Fig. 3. Once the thermometer beeps, the
unit is ready for measurement.
NOTE: To switch the mode again, wait until the unit beeps
and then press and hold both the 'Mode' and 'Memory'
buttons until the mode switches to either °C or °F.
appears to measure a person and the
appears to measure an object, Fig. 2.
S M
Mode
button
Memory
button
fig.1
fig.2
fig.3