Moisture Sensors; Replacing The Interior Light; Troubleshooting Guide - essentiel b ESLE8-1b Notice D'utilisation

N
: Over time, the filter surface may become clogged. If this happens, wash the filter with
ote
water. IMPORTANT: Make sure that the filter mesh is completely dry before putting it
back in its housing.

Moisture sensors

Your appliance is equipped with moisture sensors that detect whether or not the laundry is dry.
To clean the moisture sensors:
Open the loading door of the dryer.
1.
Let the appliance cool down if drying has just finished.
2.
Clean the metal sensors with a soft cloth dampened with vinegar and then dry them.
3.
Clean the metal sensors four times a year.
Never use solvents, cleaning products or other similar substances when cleaning as these
products may cause fire or explosion.

Replacing the interior light

If the drum light is defective, please contact your retail store service desk.
Do not attempt to replace the light yourself.
The light used in this appliance is not suitable for lighting a room. This light is designed to
help you comfortably place laundry inside the appliance. The light used in this appliance can
withstand extreme physical conditions (such as vibration) and temperatures exceeding 50°C.
62
V.1.0
cleaning and maintenance

troubleshooting guide

The drying process is taking a very long time.
−
The lint filter and its housing are not properly cleaned.
•
The filter mesh may be clogged. Wash the filter with water.
•
IMPORTANT: Make sure that the mesh is completely dry before putting the filter back
in its housing.
The dryer room may have insufficient ventilation. Open the door to the room or a window.
•
Lint has accumulated on the moisture sensors. Clean the moisture sensors.
•
Too much laundry has been placed in the machine. Do not overload your dryer. Respect
•
the maximum quantities recommended in the programme table.
The laundry has not been spun enough in the washing machine before being placed in the
•
dryer. Spin at a higher speed with your washing machine.
Laundry is still damp after drying.
−
You may have used a programme that is not suitable for the type of laundry. Check the
•
clothing labels and select a suitable programme and/or use a timed programme as well
(10 or 30 minutes).
The filter mesh may be clogged. Wash the filter with water.
•
IMPORTANT: Make sure that the mesh is completely dry before putting the filter back in
its housing.
The filter housing may be clogged with lint. Make sure that lint is not clogging the
•
filter housing.
Too much laundry has been placed in the machine. Do not overload your dryer. Respect
•
the maximum quantities recommended in the programme table.
The laundry has not been spun enough in the washing machine before being placed in the
•
dryer. Spin at a higher speed with your washing machine.
The appliance or the programme is not starting.
−
The appliance may be unplugged.
•
The appliance door may be ajar. Make sure that the appliance door is closed properly.
•
You have not selected a programme or you have not pressed the button
•
the programme.
The child lock may be enabled. Disable the child lock.
•
You may have selected a delayed start.
•
− The programme stopped for no reason.
The appliance door may be ajar. Make sure that the appliance door is closed properly.
•
There may have been a power outage. Press the
•
to start
button to restart the programme.
63
V.1.0
troubleshooting guide