Electrical Connections - essentiel b ESLE8-1b Notice D'utilisation

the opposite side of the dryer's hinge, preventing
the dryer from fully opening.
Do not install or leave this appliance where it may
•
be exposed to outdoor conditions.

Electrical connections

Connect the appliance to an outlet fitted with an
•
earthing connection and protected by a fuse with
the appropriate capacity (see the rating plate),
correctly installed and connected to the electrical
network in accordance with the standards in force.
The appliance must be connected to the electrical
•
network through an omnipolar switch (e.g. circuit
breakers, fuses, circuit breakers and contactors)
with at least 3 mm between the contacts.
Improper connection of the product earthing
•
conductor can result in electric shock. If you have
any doubts about the earthing connection, have it
checked by a qualified electrician, service agent or
maintenance personnel.
To reduce the risk of electric shock, do not use
•
extension cords, power strips or adapters to
connect the dryer to the power outlet.
Do not modify the plug provided with the appliance
•
in any way. If the plug does not fit the outlet, have
the outlet replaced by a qualified electrician.
40
V.1.0
safety instructions
If the power cord is damaged, it must be replaced
•
by your dealer, the customer service department
or a similarly qualified person to prevent harm.
This appliance must be unplugged during
•
installation, maintenance and repair. These must
always be performed by the technical service.
The manufacturer cannot be held responsible
for damage resulting from work carried out by
unauthorised persons.
Use
Use your appliance at temperatures between + 5°C
•
and + 35°C.
Do not use electrical appliances inside the dryer.
•
Before loading the laundry into the machine, check
•
for and remove any items left behind (lighters,
coins, objects, needles, etc.).
Never use the dryer without the lint filter.
•
Never touch the plug with wet hands. Never unplug
•
the machine by pulling on the cable; always grasp
the plug to disconnect it. Do not operate the
machine if the power cable or plug is damaged!
The final part of the drying cycle uses no heat
•
(cooling cycle) to ensure that the items are left at a
temperature that will not damage them.
41
V.1.0
safety instructions