Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL ELECTRONIC LOCK MINIK10
Restore factory
settings
After resetting, the master code remains unchanged. It will not be set back to the factory code!
Locker function
Sound
Usage blocking
Remove user
Set service code
Lock with access code
Warning
Service code emergency
unlocking - reset
Service code emergency
opening unlocking
- blocking
20
0
1
Locker mode active (1-1)
Sound on is active (2-1)
Usage blocking is not active (3-0)
User code has been deleted and restored back to factory code (4-0)
Service code is not active (5-0)
Locking without service code is active (6-1)
Open door warning is not active (7-0)
User code reset is not active (8-0)
Lock blocking is not active (9-0)
1
0
Single user mode
1
Locker Mode
2
0
Sound off (except for warnings)
1
Sound on
3
0
Usage blocking is not active
1
Usage blocking is active
4
0
Restore preprogrammed user code back to factory code
(single user mode)
5
0
Service code is not active
1
Service code is active
6
0
Lock with access code is active (single user mode)
1
Lock without access code is active (single user mode)
7
0
Open door is not active
1
Open door is active
8
0
Resetting user code after using a service code is not active
1
Resetting user code after using a service code is active
Blocking is not active after using service code
9
0
(if service code is active)
Blocking is active after using service code
1
(if service code is active)
Publicité
Table des Matières
