Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USER MANUAL ELECTRONIC LOCK MINIK10
3. Changing the master-, user- and service codes
When using a new code, it is best to test it multiple times with the safe door open.
3.1 Change user code (only for single user mode)
Step
1.
Enter user code (factory code 1-0-1-0)
2.
Enter a new 4-digit code , for example 1-2-3-4
You will hear a sound and a green light will turn on once the code is accepted.
3.2 Changing the master code
Step
1.
Enter master code (factory code 1-0-1-0-1-0)
2.
Enter a new 6-digit code, for example 1-2-3-4-5-6
You will hear a sound and a green light will turn on once the code is accepted.
3.3 Changing the service code
Step
1.
Enter service code (factory code 1-0-1-0-1)
2.
Enter a new 6-digit code, for example 1-2-3-4-5
You will hear a sound and a green light will turn on once the code is accepted.
When first using the lock you should first activate the service code, see chapter 5, programming the
lock.
4. Opening and closing the locker
4.1 Opening the lock (single user mode)
Step
1.
Enter the factory code, for example 1-2-3-4
Turn the knob to the open position and the lock is open.
4.2 Closing the lock (single user mode)
Turn the knob to the locked position, and the lock will close (it can be locked without a code!).
18
Action
Action
Action
Action
Key
*1-0-1-0*
1-2-3-4*
Key
##1-0-1-0-1-0#
1-2-3-4-5-6#
Key
**1-0-1-0-1*
1-2-3-4-5*
Key
1-2-3-4
Publicité
Table des Matières
