Nicols GOBOPRISM LED Manuel D'utilisation page 5

Please read this user manual carefully and follow the instructions to avoid danger or
damage to the unit due to mishandling.
A. SAFETY INTRODUCTIONS
 Please keep this User Manual for future consultation. If you sell the unit to another user,
be sure that they also receive this instruction booklet.
 Unpack and check carefully there is no transportation damage before using the unit.
 Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
 It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.
 The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
 Disconnect mains power before replacement or servicing.
 Replace only with the same type.
 Make sure there are not flammable materials close to the unit while operating, as it is fire
hazard.
 Use safety cable when fixes this unit.
 In the event of serious operating problem, stop using the unit immediately. Never try to
repair the unit by yourself. Repair carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center and always
use the same type spare parts.
 Do not look at the beam light directly to avoid any visual problems.
 Be careful to possibly hazardous optical radiation emitted from this product.
Warnings
 Always remember to unplug the unit from the main power before any service is done.
 There are no user serviceable parts inside.
 Qualified personnel should do Service only.
 Do not touch any wires during operation.
 Do not touch the unit barehanded during operation.