Gira 2331 02 Notice D'installation page 12

Contents
1 Product overview
2 Installation and commissioning
3 Wired networking of smoke alarm devices
4 Operating and alarm signals
5 Technical data
6 Warranty
1 Product overview
The 230 V base is used to supply 230 V mains power to Smoke alarm
device Dual/VdS. The battery fitted to the smoke detector is used for
backup power in the case of a power outage.
Please note that when the 230 V base is used, the way the unit is
installed and networked, and the signals that are produced, are different
to those with battery-only operation. This manual describes these
differences.
Other features
Please refer to the "Installation and User Manual - Smoke alarm
device Dual/VdS" for information on all other features of the smoke
detector, including deactivating smoke detection, function test,
manually suppressing signals, changing the battery, and maintenance
and cleaning instructions.
12
12
14
16
17
19
19